flow-rite.com has this interesting hose quick connect/disconnect system. Their are many places on a boat where this sort of device can make life simpler. I use a similar device for my bilge pumps which helps me get them quickly out of the bilge if they need servicing. Looks like a great product.
Qwik-Lok is a quick disconnect marine plumbing system and method that can provide increased productivity, higher quality and value while simultaneously reducing costs. The heart of the Qwik-Lok system is the innovative Qwik-Lok socket that fits industry standard marine hose in popular 3/4" and 1-1/8" sizes. Qwik-Lok’s numerous benefits make it much more than just a quick disconnect plumbing system.
Qwik-Lok fittings are installed in place of standard barbed fittings. Zero learning curve required. Qwik-Lok sockets are installed to the hose ends whether it’s pre-assembled in our factory or done at the boat or on the work bench. No more crimping or tightening a hose clamp at arms length in hard to reach areas. Only learning curve here is to get used to how easy life can be.
With the locking ring back out of the locked position and into the neutral position, simply push that end of the hose onto the fitting until the socket snaps into place, then push the locking ring into the latch and locked position.
To remove, just grasp the same locking ring and pull. The latches will automatically disengage and the hose will be free. The only tools you need are one thumb and forefinger.
Post a Comment
Note: Only a member of this blog may post a comment.